Custom Rigging - Replacement Shrouds for Albacore (Pair)

A pair of shrouds for the Albacore dinghy class (3mm dia. T terminal to swaged OR hard eye using 1x19 wire). Suitable for the Selden & Super Spars range of Albacore masts.

Measurement of Shrouds

Rooster use a Bearing Surface (BS) to Bearing Surface (BS) length measurement.  On the Albacore shroud this is from the lower swaged (or hard eye) eye to the T terminal, and a length of (a guide only) approx. 4000mm. (See diagram and note below).

The Albacore has a number of systems to adjust the rig tension e.g. levers,quadrant adjusters, cascade systems, block and tackle systems etc.

The end terminal on the shroud can either be a swaged eye or a hard eye. Please input your full requirements using the input box above, along with the LENGTH required. Albacore rigs will vary and each one is custom made to order.

NOTE: For Albacore Super Spars masts only the shrouds come complete pre fitted with a pair of spreader end adjusters.

Please input your Bearing surface to Bearing surface length measurement and end terminal required.

A typical layout of an Albacore dinghy adjustable rig

Please note this item is classified as a CUSTOM PRODUCT and hence customers should be aware of the returns policy as found in the current Rooster Terms and Conditions.